8 core Defibrillator leads -Branch
Managing instantaneous high-voltage cardiac discharges alongside multi-channel diagnostic telemetry within a single retractable, high-flex spring-back assembly represents a core engineering limit for critical resuscitation hardware. Conectmed (the official global brand branch of Shen Zhen Yong Qiang Fu Industry Co.,Ltd.) custom-manufactures wholesale bulk spools of premium defibrillator paddle coiled cable matrices. Precision-built to streamline high-density 8 core defibrillator leads at the patient-end branch, our hybrid medical spiral wires ensure zero signal distortion or dielectric arcing under continuous clinical extensions.
💡 Material Science & Performance Mastery: 1C High-Voltage + 7C Control Matrix
Standard commercial spiral cords often suffer from rapid snap-back fatigue, outer jacket micro-cracking, and arcing risks during sudden emergency deployments. Conectmed eliminates these life-critical vulnerabilities via advanced multi-layer extrusion:
DC 4000V Defibrillation-Proof Path: The primary 1C high-voltage channel integrates ultra-fine tinned copper strands wrapped around a 200D Kevlar center. Insulated in premium TPE, it safely handles DC 4000V/60S pulses with leakage current below 0.008mA.
Independent 7-Core Signaling Array: The remaining 7 low-voltage tracks (26 AWG) utilize space-saving PP insulation to route trigger switches and LED indicators entirely free from electro-magnetic cross-talk.
Genuine BASF Elastollan® 1185AM Jacket: The outer spiral sheath is extruded exclusively in premium BASF polyurethane. This ensures superior memory retention (extreme snap-back stamina) and full ISO 10993 biocompatibility through thousands of hospital chemical wipe-downs.
technical specification
| Item | (specification) | ||
| conductor | Material | Tinned copper + Kevlar(1c) | Tinned copper +Kevlar (7c) |
| specification | 165/0. 05TC + 30/0. 05TSN + 200DKevlar | 30/0. 08TC + 200DKevlar | |
| Twisted gauge | 22AWG | 26AWG | |
| Complete diameter | 0.80MM | 0.51MM | |
| insulation | Material | TPE | PP |
| thickness | 0.6 | 0.17 | |
| diameter | 2. 0 ± 0.05 | 0.85 ± 0.03 | |
| colour | red | 7 different colors | |
| Cabling | Material | Tissue paper + 1500Dkevlar | |
| Wrap thickness | 0.05MM | ||
| Overlap rate | 50% | ||
| Jacket | Material | TPU (BASF Elastollan 1185AM) | |
| thickness | 1 | ||
| diameter | 5.80 ± 0.20 | ||
| colour | TBD | ||
| Performance requirements: | |||
| 1. Resistance requirements: 22AWG–53.9Ω MAX 26AWG — 131Ω MAX | |||
| 2. High voltage resistance: core wire 1 and core wire 2, core wire and sheath resistant to DC4000V / 60S, leakage current 0.008mA / MIN 3, DC500V Insulation above 500M0 (test sample line 1 ~). | |||
| 4. load bending test: | |||
| 4.1. After bending 10000 times (+/- 90 “, 30 times / mmn 5000 times, rotating 90” around the axis, hanging weight 500g) , 10% of the strands cannot be broken. | |||
| 4.2. After bending 100000 times (+/- 90 “, 30 times / mmn 50000 times, rotating 90” around the axis and hanging weight 500g), the core wires are continuous. | |||
| 5. Appearance Requirements: smooth appearance, no defects, unevenness. | |||