Custom Silicone Endoscopy Handle Cable Factory | SIL-COAX-7
Integrating high-frequency energy transmission alongside multi-channel control lines into a single surgical instrument handle requires advanced layout ergonomics and extreme thermal insulation. As an ISO 13485 certified medical cabling pioneer, Shen Zhen Yong Qiang Fu Industry Co.,Ltd. custom-extrude high-performance silicone endoscopy handle cables on wholesale master spools. Our specialized hybrid configuration (Model: SIL-COAX-7) bundles a premium RG178 high-frequency coaxial channel with 7 independent control copper strands under an elite, vulcanized medical-grade solid silicone rubber jacket.
medical endoscope handle cables typically include at least one coaxial cable. The coaxial cable is primarily used for transmitting image signals or video signals. The image sensor on the endoscope handle transmits the captured image signals to an external display device through the coaxial cable for the healthcare professional to observe.
In addition to the coaxial cable, the endoscope handle cable may also include other types of cables such as illumination signal cables, control signal cables, and power cables to meet various functionalities and requirements of the endoscope system. The specific cable composition and quantity may vary depending on the endoscope model, manufacturer, and functionalities. However, at least one coaxial cable is typically a fundamental component of a medical endoscope handle cable.
There are also other structure endoscope handle cable ,such as:
- 5 wire:1 coax+4 Wire ；11 wire:1 coax+10 wire;17 wire:1Coax+16 wire
- 5 wire:2 Coax+3 wire;8 wire:2 coax+6 wire
- 5 wire:3 Coax+2 wire
Engineering Advantages of SIL-COAX-7 Series:
Generic PVC or TPU surgical cables quickly experience jacket stickiness, insulation melt-through, or signal dropouts after multiple sterilization cycles. Our factory bypasses these field failures:
* 500+ Autoclave Cycle Lifetime: Extruded utilizing high-consistency vulcanized solid silicone rubber, ensuring the outer jacket maintains its silky, non-sticky ergonomic texture under continuous 134°C high-pressure steam sterilization.
* Precision RG178 Coaxial Integration: The internal RG178 micro-coaxial stream maintains a rigid 50 Ohm characteristic impedance with minimal attenuation, guaranteeing crisp, real-time diagnostic video telemetry or stable RF electrocautery energy delivery.
* High-Flex Tinned Copper Shielding: Wrapped in a dense tinned copper spiral shield matrix to eliminate high-frequency electromagnetic interference (EMI) irradiated from ambient electrosurgical units (ESU) in the operating room.
technical specification
Inner Conductor : Tin Plated Copper Wire
Gauge:3 wire 26AWG +3 wire 28AWG
Coax:RG 178 (30AWG) (Silver plated copper)
Insulation:FEP
Filler ：NO
Braiding Shield：Tin Plated copper wire
coverage rate≥95%
Jacket：Black medical grade Silicone Rubber,Diameter 6.1mm±0.15mm
Application：Medical field，Endoscope Handle connection to the Main Unit
You May also interested in
Silicone rubber endoscope
Silicone rubber structured bundled cable for endoscope 22 Wire=4P (32AWG)+ 7C (32AWG) +4C (32AWG) +3C (32AWG)
14 wire electrosurgical units Cable
3 Wire 22 Awg +11 Wire 26AWG,FEP Insulation,Silicone Jacket,φ7.5±0.15mm
🛑 Stop Letting Rigid Supply Chains and Sticky Component Jackets Compromise Your Surgical Handle Performance.
Partner Direct with an Agile, ISO 13485 Certified Medical Silicone Extrusion Factory.
If this 7-conductor custom RG178 silicone specification (Model: SIL-COAX-7) aligns with your active electrosurgical, endoscopic, or energy platform handle blueprint, fill out our technical form below, define your annual volume forecast, and contact the Shen Zhen Yong Qiang Fu Industry Co.,Ltd. engineering team to request your Free Factory Bulk Samples today!