The 10 Core Defibrillator Cable-CO210X-TPV

The 10 Core Defibrillator Cable consists of 2x22AWG Shielded High Voltage Wire And 8 Signal Wire. It meet EC 53 standard regarding to Noise ,Voltage and flexibility.

This Defibrillatror cable is a coil cable with extended length about 2.4 meters and Santoprene TPV Jacket,is very welcome by USA Market. The coiling length and Jacket materials ,colors can be customized manufactured.

EC 53 10 Core shielded cable 2+8 AED cable with low noise layer
EC 53 10 Core shielded cable 2+8 AED cable with low noise layer
10 Core shielded cable Spiral cable for Defibrillator
10 Core shielded cable Spiral cable for Defibrillator





technical specification

ConductorMaterialTinned copper alloy+kevalr2CTinned copper alloy+kevalr 8C
AWG22AWG26AWG
Construction25/0.05Tsn+200DKEVALR*7C66/0.05Tsn+200DKEVALR
Pitch  
Pitch Directionrightright
Stranded O.D  
InsulationMaterial  
NO of wire2C8C
O.D mm1.9±0.081.05±0.05
AVG. Thickness mm0.450.22
Min. Thickness mm0.360.17
ColorRED/BLK8 colors
Low-noiseMaterialConductive PVCN/A
NO of wire2CN/A
O.D mm2.1±0.05N/A
 Outer shieldMaterialTinned copperN/A
Type0.08TC SpiralN/A
Coverage95%N/A
WrapMaterialPTFEN/A
coverage>25%N/A
FillingMaterialkevlar
CablingPitch mm60±10
MaterialFILLER+ALL CORE
 5.7
WrapMaterialPTFE
coverage>25%
JacketMaterialTPV Santoprene
O.D mm7.6±0.2
AVG. Thickness mm 
Min. Thickness mm 
ColorBLACK or Customized
Mark
 

Electronic properties

1, A: Bending 20,000 times +/-90°, 30 times/min R=25.4MM, Load 1500g, no short circuit
2. Tensile Test: 50kg/1min
3. Resistance: 22AWG-92Ω/KM MAX 26AWG-195Ω/KM MAX
4. Insulation Resistance-500M Ohms/2.5M, min
5. Hipot test: :A-A A-B /2.5M @ 7500V DC without break

Contact Form