The 10 Core Defibrillator Cable-CO210X-TPV
The 10 Core Defibrillator Cable consists of 2x22AWG Shielded High Voltage Wire And 8 Signal Wire. It meet EC 53 standard regarding to Noise ,Voltage and flexibility.
This Defibrillatror cable is a coil cable with extended length about 2.4 meters and Santoprene TPV Jacket,is very welcome by USA Market. The coiling length and Jacket materials ,colors can be customized manufactured.
technical specification
| Conductor | Material | Tinned copper alloy+kevalr2C | Tinned copper alloy+kevalr 8C | ||||||
| AWG | 22AWG | 26AWG | |||||||
| Construction | 25/0.05Tsn+200DKEVALR*7C | 66/0.05Tsn+200DKEVALR | |||||||
| Pitch | |||||||||
| Pitch Direction | right | right | |||||||
| Stranded O.D | |||||||||
| Insulation | Material | ||||||||
| NO of wire | 2C | 8C | |||||||
| O.D mm | 1.9±0.08 | 1.05±0.05 | |||||||
| AVG. Thickness mm | 0.45 | 0.22 | |||||||
| Min. Thickness mm | 0.36 | 0.17 | |||||||
| Color | RED/BLK | 8 colors | |||||||
| Low-noise | Material | Conductive PVC | N/A | ||||||
| NO of wire | 2C | N/A | |||||||
| O.D mm | 2.1±0.05 | N/A | |||||||
| Outer shield | Material | Tinned copper | N/A | ||||||
| Type | 0.08TC Spiral | N/A | |||||||
| Coverage | 95% | N/A | |||||||
| Wrap | Material | PTFE | N/A | ||||||
| coverage | ＞25% | N/A | |||||||
| Filling | Material | kevlar | |||||||
| Cabling | Pitch mm | 60±10 | |||||||
| Material | FILLER+ALL CORE | ||||||||
| 5.7 | |||||||||
| Wrap | Material | PTFE | |||||||
| coverage | ＞25% | ||||||||
| Jacket | Material | TPV Santoprene | |||||||
| O.D mm | 7.6±0.2 | ||||||||
| AVG. Thickness mm | |||||||||
| Min. Thickness mm | |||||||||
| Color | BLACK or Customized | ||||||||
| Mark | |||||||||
Electronic properties
1, A: Bending 20,000 times +/-90°, 30 times/min R=25.4MM, Load 1500g, no short circuit
2. Tensile Test: 50kg/1min
3. Resistance: 22AWG-92Ω/KM MAX 26AWG-195Ω/KM MAX
4. Insulation Resistance-500M Ohms/2.5M, min
5. Hipot test: :A-A A-B /2.5M @ 7500V DC without break